Write-On Arc Flash & Shock Sign - Cal/Cm2 Flash Hazard At 18 Inches PPE Level ___ Shock Hazard When Cover Is __

Home > OSHA Safety Signs > Electrical Hazard Signs >

WRITE ON ARC FLASH & SHOCK HAZARD Sign

Arc Flash and Shock Hazard Appropriate PPE Required Flash Hazard Boundary Cal/Cm2 Flash Hazard At 18 Inches PPE Level ___ Shock Hazard When Cover Is ___ Limited Approach Restricted - Choose 7 X 10 - 10 X 14, Self Adhesive Vinyl, Plastic or Aluminum.

Warning Arc Flash and Shock Hazard Appropriate PPE Required (Write On) Cal/Cm2 Flash Hazard At 18 Inches PPE Level ___ Shock Hazard When Cover Is ___ Limited Approach Restricted Sign, Choose 7 X 10 - 10 X 14, Pressure Sensitive Vinyl, Plastic or Aluminum.

Warning Arc Flash and Shock Hazard (Write On) Appropriate
Personal Protection Required Sign

Starting at $9.89

Product Code: 10792

Choose Size and Construction

Size & Construction*:

Qty:

Product Discription

Technical Specs

Product Discription

Warning Arc Flash and Shock Hazard (Write on) Appropriate PPE Required Sign.
ANSI Compliant Warning Arc Flash and Shock Hazard Appropriate PPE Required (Write On) Cal/Cm2 Flash Hazard At 18 Inches PPE Level ___ Shock Hazard When Cover Is ___ Limited Approach Restricted Signs, Make it clear that your policy promotes safety first. Set the tone for a clean and accident-free working environment. Communicate the importance of avoiding accidents. Be committed to improving conditions for workers. OSHA recognizes the importance of posting high quality safety signs in all hazardous and unsafe areas of a work environment.These safety signs are intended to indicate the potential, type, and degree of the hazard that may lead to accidental injury and property damage. Accident Prevention Signs are intended to convey a clear and rapidly understood message of the specific hazards.

Electrical shock, arc flash, and arc blast are hazards associated with working on or in close proximity to energized equipment. All three types can and do occur in industrial facilities. The three applicable regulatory standards are OSHA 29 CFR 1910 subpart S-Electrical, NFPA 70E-2000 edition, and NEC 2002.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

OSHA Safety Signs > Electrical Hazard Signs
Lock-Out and Electrical > Electrical Markers
OSHA Safety Signs